192.168.1.1

The IP 192.168.1.1 is in the range between 192.168.0.0 and 192.168.255.255 which makes it a private IPv4 address.The password of this address will be different according to the router manufacturers' set.

The password of this address will be different according to the router manufacturers' set.

It's default User name: admin, password: admin. Not only broadband routers can use this IP address, Printer or other device can be set up to use 192.168.1.1 instead of a router.

It's a private IP address, you can use the 192.168.1.1 IP to access your own router, but you can’t access other people routers by typing that IP in your web browser.

192.168.1.1 is a private IP address because it can only be identified inside the network it is currently working in and not outside of it.

While today these settings are good enough to secure your network, quite often keeping some of the settings at their default values (password, SSID) will put your network at risk. When you add a new device to your network, make sure that its default IP address is not already in use.

The IP address 192.168.1.1 can be used to improve the security of your home network because it gives you access to your router settings via a web-based utility.

The majority of mainstream brand router(Without the wireless router), the default login address is http://192.168.1.1.

192.168.0.1

192.168.0.1 is set by the manufacturer at the factory as the router’s default IP address to access the administration console, you can change it at any time using the network router's administrative console.

192.168.0.1 IP address is the first place you go if you experience any networking problems.The popularity of 192.168.0.1 is also attributable to the manufacturers.

IP address 192.168.0.1 is considered private as it falls within the range 192.168.0.0 up to 192.168.255.255 which are IP addresses issued to computers and devices on a single network.

The address 192.168.0.1 is also referred to as a gateway address, with the gateway meaning network access point.Any brand of router, or any computer on a local network for that matter, can be set to use 192.168.0.1 or a comparable private IPv4 address.

Can not enter the router setting page through 192.168.0.1?

You should find your router's reset button and restore it. Then access the router through IP 192.168.1.1 not 192.168.0.1, but you need to reset the router because it is the default settings now!

In fact, you do not need to reset in this way. Check the ip of your computer, then just change the last digit, copy the default gateway. It also can solve the problem.